$29.65 incl. GST: $32.62
Remover for finished floors. Regular stripping, coupled with coordinated maintenance, increases the lifespan of finished parquet flooring many times over.
Available on backorder
Remover for finished floors. Regular stripping, coupled with coordinated maintenance, increases the lifespan of finished parquet flooring many times over.
Suitable for removing old layers of care product from water-resistant
floor coverings such as finished hardwood floors, cork
coverings, linoleum, PVC and rubber coverings.
| Weight | 1000g |
|---|---|
| Hight | 28cm |
| Width | 10cm |
Recently added our store
Ready-to-use 1-component polyurethane primer for priming absorbent and non-absorbent subfloors, and to reinforce abraded resp. sanded concrete edges. Also for capillary ascending humidity and higher residual humidity up to 6 CM% / 98 corresponding RH % in cement screeds without floor heating, on heated cement screeds up to max. 3 CM% / 85 corresponding RH % as well as on concrete up to max. 7,5% by weight / 98 corresponding RH %; applicable as moisture barrier on unheated cement screeds and concretes without prior moisture measurement.
WAKOL Primer Roller or short haired velour roller
approx.100-150 g/m² as primer, approx. 250-350 g/m² as moisture barrier
Firm-elastic 1-component MS parquet adhesive for laying mosaic, on-edge lamella (min. 16 mm in width, max. 200 mm in length), strip, 10 mm solid wood lam parquet, multi-layer parquet, solid planks (up to max. 18 cm in width, type of wood oak up to max. 20 cm in width), wood block RE/WE as well as flatlying cork flooring and cork flooring with HDF/MDF middle layer with tongue and groove resp. click-connection on absorbent and non-absorbent subfloors indoors. WAKOL MS 260 corresponds to DIN EN ISO 17178.
Trowel notch size according to TKB B3, B11, B13 or B15 (parquet), A2 (cork), WAKOL Speciality Trowel 5, WAKOL Speciality Trowel Blade 5
approx. 700-1500 g/m² parquet approx. 400-450 g/m² cork approx. 1700-1800 g/m² with WAKOL Speciality Trowel 5 or WAKOL Speciality Trowel Blade 5.
Additive to improve the anti-slip properties. LOBA SlipResist achieves certified slip resistance of the surface by addition in the final finish layer, thus extending the application range of the finishes and at the same time reducing the effort for stock-keeping.
Perfectly adjusted for water-based LOBA finishes.
Select at least 2 products
to compare
